Borssele Beta is a TenneT-owned 700 MW HVAC offshore grid connection and offshore substation (OSS) built to collect and export electricity from the Borssele III & IV (Blauwwind) and Borssele V (Two Towers) wind farms. The system uses a standardised 700 MW topside platform located offshore that collects generation at...
Press enter or space to select a node. You can then use the arrow keys to move the node around. Press delete to remove it and escape to cancel.
Press enter or space to select an edge. You can then press delete to remove it or escape to cancel.
Route
North Sea
Zeeland
Landfall
N/A
Borssele, Zeeland, Netherlands
Grid Connection
—
Borssele 380 kV substation
North Sea
Landfall:N/A
Grid:—
Zeeland
Landfall:Borssele, Zeeland, Netherlands
Grid:Borssele 380 kV substation
Cable Specifications
Borssele Beta export cable system
Borssele, Zeeland, Netherlands
2 × 220 kV HVAC · 700 MVA · 60 km
System:2 × 220 kV HVAC
Power rating:700 MVA
Route length:60 km(60 subsea)
Burial depth:
Burial depth varies significantly along the Borssele Beta export cable route. Published project documents indicate a nominal/shallow burial practice of about 1 m in the open North Sea sections and...
Borssele Alpha–Beta interconnector
1 × 66 kV HVAC · 7 km
System:1 × 66 kV HVAC
Route length:7 km(7 subsea)
Burial depth:
Project-level requirement for the Borssele Alpha/Beta cable works included deep burial: Boskalis states export cables were installed and buried up to 10 m below the seabed. The installation method described...
Collector Stations
Borssele Beta offshore substation
Borssele Wind Farm Zone (Borssele Beta), North Sea (off Walcheren, Netherlands), Netherlands